Insert Tools, Accessories; Technical Data - Hilti TE 2-A22 Operating Instructions Manual

3 Insert tools, accessories

Designation
Hammer drill bits
Anchor-setting tools
Wood drill bits (auger bits)
en
Metal drill bits
Chuck, no tool required
Toothed ring chuck
Designation
Side handle
Depth gauge (5 x 180 mm)
Dust removal system
Dust shield
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Battery
Battery

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Hammer drilling speed
No-load speed in hammer drill mode
Single impact energy in accordance with EPTA proced-
ure 05/2009
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardized test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintaining the tool and the accessories,
keeping hands warm, organization of work patterns.
18
Description
∅ 4...16 mm
C-type connection end
∅ Max. 14 mm
∅ Max. 10 mm
13 mm; with connection end
13 mm, with connection end
Short designation
TE DRS‑S
C 4/36‑90
C 4/36‑350
C 4/36
C 4/36‑ACS
C 4/36-ACS TPS
B 22/3.3 Li‑Ion
B 22/2.6 Li‑Ion
B 22/1.6 Li‑Ion
TE 2‑A22
21.6 V
2.7 kg
322 mm x 94 mm x 238 mm
0...980/min
0...1,090/min
1.5 J