Charging The Battery - Motorola P160 Series User Manual

Charging the Battery

1. Turn the radio OFF when charging battery.Make sure
the radio is OFF.
2. Plug the power supply into an electric outlet.
3. Connect the power supply output cord connector into
the rear of the Desktop Charging Tray.
4. The LED on the charger blinks green once to indicate
charger is turned ON.
12
English
5. Insert a battery, or a radio with a battery into the
charger's pocket by:
aligning the groove on each side of the battery
with the corresponding raised rail on each side of
the charger pocket
OR
pressing the battery towards the rear of the
pocket
OR
sliding the battery into the charger pocket,
ensuring complete contact between the charger
and battery contacts.
6. The charger's LED color will indicate the battery
charging status. (See Charging Status on page 13).
Refer to picture below for the battery insert visual guide line.
Battery insert visual guide line
Battery Charging Tray