Transmission-210 And - CORRECT CRAFT Nautique 220 Owner's Manual

Transmission-210, 211, 220 and
236
!
WARNING
can cause serious injury. Do not remove the
transmission drain/fill plug while the engine is running
or while the transmission is hot.
Allow the transmission to cool and check with the boat level.
1. Remove the drain/fill plug from the transmission.
2. Verify the fluid level; the fluid level should be at the bottom of
the threaded hole. If low, add the specified fluid through the
threaded hole to the proper level.
The transmission fluid is a very high viscosity, to make adding
fluid easier, remove both fill plugs.
3 Replace the drain/fill plug and tighten securely.
Oil Fill/Drain
Plug
Care and Maintenance
Burn hazard from hot transmission fluid
NOTICE
Raw Water
Drain Plug
Oil Fill/Drain
Plug
CORC210
8-17