Emergency Stop Switch - CORRECT CRAFT 210 Owner's Manual

V-Drive Sec 4_2010.qxp:Naut Air Sec 4.qxd

Emergency Stop Switch

The emergency stop switch will stop the engine when the lanyard is
pulled far enough to disengage it from the switch. Attach the
lanyard to the boat operator whenever the engine is running but be
aware there will be a loss of engine power if the switch is activated.
If the operator is thrown from the seat, or moves too far from the
helm, the lanyard will become disconnected from the switch,
shutting off the engine. Refer to Section 1 for more information.
CAUTION
without the proper use of the emergency stop switch
and lanyard.
To attach a lanyard, connect the clip to the emergency stop switch
and the hook to a strong piece of clothing on the operator, such as
a belt loop.
The engine will not start unless the emergency stop switch is
attached.
Controls and Indicators
DO NOT allow your boat to be operated
EMERGENCY STOP SWITCH
CLIP
LANYARD
HOOK
NOTICE
7/22/09 1:44 PM Page 5
CORC0224
4-5