Propeller; Removal - CORRECT CRAFT 210 Owner's Manual

V-Drive Sec 8_2010.qxp:Naut Air Sec 8.qxd

Propeller

CAUTION
• A propeller can be very sharp. Be careful when you
handle it. Wear a pair of protective gloves when
handling any propeller.
• Remove your key from the ignition and remove the
Emergency Stop Switch clip from the switch to
prevent accidental starting of the engine.
• DO NOT reuse the nylon locknut or the cotter pin.
• DO NOT use a damaged propeller. A damaged
propeller can damage your engine and boat.

Removal

1. Remove the cotter pin from the propeller shaft and discard.
2. Wedge a piece of 1" x 4" wood between the propeller blade and
the starboard side of the strut and rudder.
3. Remove the nylon locknut and discard.
7/22/09
Care and Maintenance
1:47 PM Page 8-5
8-5