Sharp LC-26GA3E Service Manual page 21

3.Entering and exiting the adjustment process mode
(1) Before entering the adjustment process mode, press the "TV RESET" button or execute the AV position
RESET in the video adjustment menu.
(2) Pull out the AC cord to turn off the TV.
(3) While holding down the "VOL (–)" and "INPUT" keys at a time, press the POWER switch of the main unit to
turn on the power.
The letter " K " appears on the screen.
(4) Press the "VOL (–)" and CH (V) keys at the same time.
When multiple lines of blue letters are displayed on the screen, the unit has entered the process adjustment
mode.
If the unit does not enter the process adjustment mode (if the same display as the normal start appears), try
again.
(5) To exit the adjustment process mode after the adjustment is done, unplug the AC cord from the outlet to
make a forced shutdown. (When the power was turned off with the remote controller, once unplug the AC
cord and plug it again. In this case, wait 10 seconds or so before plugging.)
Caution: Use due care in handling the information described here lest your users should
know how to enter the adjustment process mode. If the settings are tampered in this mode,
unrecoverable system damage may result.
4.Remote controller key operation and description of display in adjustment process
mode
(1) Key operation
Remote controller key
CH (Ù/ù)
VOL (+/–)
Cursor (UP/DOWN)
Cursor (LEFT/RIGHT)
INPUT mark of the R/C
(caution required)
ENTER
* Input mode is switched automatically when relevant adjustment is started so far as the necessary input
signal is available.
(2) Description of display
Main unit key
CH (Ù/ù)
VOL (+/–)
INPUT
(2) Current page title
(1) Current page /
Total pages
1/16
[INFO]
TUNER
MAIN Version 1.XX (E 2004/XX/XX X)
TELETEXT Version TTX PRG
DVS Version XX
CPLD Version XX
Monitor Version 3.XX
EQ DATA CHECKSUM A15E
STANDBY CAUSE a
FAN STATUS ROTATE
TEMPERATURE XX
Function
Moving an item (line) by one (UP/DOWN)
Changing a selected item setting (+1/_1)
Turing a page (PREVIOUS/NEXT)
Changing a selected line setting (+10/_10)
Input switching (toggle switching)
(TV→INPUT1→INPUT2→INPUT3→INPUT4)
Executing a function
(3) Currently selected input
(4) Current color TV system
AUTO AUTO:EURO
21
LC-26GA3E
(5) Destination
Adjustment process menu header
(7) Parameters