Parts And Their Function; Top Panel - Vox Soundbox mini Owner's Manual

Parts and their function

Top Panel

5 6
1
2
3 4
Input Section
1. Input jacks
Here is where you will connect the output of a musical instrument,
such as a guitar, or an audio device. For monophonic sounds, use the
GUITAR (L/MONO) jack.
NOTE: The R jack is available only when you have selected KBD with
the INST selector.
2. MIC jack
Connect a microphone here.
3. TRIM knob
This knob enables you to adjust the volume level of the microphone
input.
4. FX2 SEND Knob
This knob enables you to adjust the volume level to be sent from the
microphone input to effect 2 (delay/reverb effect).
7 8
12
13
14
15
9 10 11
AMP section
This section enables you to adjust various amplifier settings.
5. INST (instrument) selector
Select the type of musical instrument or device that's connected to
the input jack.
BASS: Bass guitar
1: This is a hi-fi sound that's suitable for slapping.
2: This is a vintage-amplifier-like sound that's suitable for finger picking.
GTR: Electric guitar
1: This is a tight and clean sound containing a deep low-pitched sound.
2: This is a crunch sound, delivering a refined top end.
3: This is a distortion sound that's suitable for playing leads.
4: This is a high-gain that's powerful and heavy.
ACO: Acoustic guitar
1: This is a sound that's suitable for strumming.
2: This is a sound that's suitable for playing single notes.
KBD: Keyboard
1: This is a sound with compression that's suitable for percussive
playing
.
2: This is a sound with rich midrange that's suitable for an electric
piano.
3: This is a flat sound that's also suitable for an external audio device
or Mp3 player.
6. LOW/GAIN Knob
When having selected BASS or GTR with the INST selector, you can
adjust the pre amp gain (GAIN). When having selected another, you
can adjust the lower volume (LOW).
5