Panasonic MDF-C8V1 Series Operating Instructions Manual page 10

FREEZER COMPONENTS
1. Lock: By turning to 180 degree to clockwise with a key, the door can be locked.
2. Door: Top hinged type. To open the door, grip the handle.
3. Door gasket: Seals the door and prevents leakage of cold air.
4. Inner lid: Serves as a means of reducing cold air leakage when the door is open. Remove the frost
regularly.
5. Access port: Located on the back side and bottom. These are used for leading the measuring
cable from the freezing chamber to the outside. The bottom port is also used for passing the
temperature sensor.
6. Space for temperature recorder: An automatic temperature recorder (optional part) can be attached
here. See page 30 "Temperature recorder (option)".
7. Control panel: The temperature setting keys etc. are located. See page 10 for details.
8. Intake air vent: Be careful not to block this.
9. Leveling foot: Serves to adjust the height and to settle the frame evenly.
10. Caster: 4 casters are provided for easy movement.
11. Fixture (back side): A fixture is attached to the rear of the frame. Fix the frame to the wall with this
fixture and rope or chain.
12. Remote alarm terminal (back side): Used to notify an alarm condition of the unit to remote location.
See page 19 for details.
13. Battery switch (back side): Switch for battery used for power failure alarm. Always keep ON.
Turn the switch OFF when the unit is in no use for a long period (more than 1 month).
14. Space for optional component: An interface board (optional component) can be attached here.
15. Power switch: A switch for supplying/disconnecting the power to the freezer.
9