Setting The Alarm & Timers; Setting The Alarm - PURE one Elite series II Owner's Manual

Setting the alarm & timers

Setting the alarm

1. Press the
2. Push the dial to enter the alarm menu. You can scroll through six alarm options on the
bottom line of the display, while the top line displays their current setting. To change a setting,
push the dial, turn it to make your selection and then push it to confi rm the change.
Off
Set alarm
07:00
Set time
Daily
Set days
Digital radio
Set mode
BBC Radio 2
Select station
10
Alarm volume
Cancelling a sounding alarm
To cancel a tone alarm push the dial or press the Standby button.
To cancel a radio alarm press any button.
Note A sounding radio alarm will switch off after one hour unless you cancel it.
Using alarms with ChargePAK C6L or batteries fitted
When a ChargePAK rechargeable battery or 'C' cell batteries are fi tted and the unit is not
connected to mains power the radio switches off completely when the Standby button is pressed.
In this case, the message 'Disabling alarm' will be briefl y displayed after the Standby button is
pressed and the alarm will not sound.
(Alarm/Timer) button and select Alarm to display the alarm status screen.
Set alarm
Push dial to choose between 'On' (alarm sounds) or 'Off' (alarm
does not sound). The
alarm is on.
Set time
Push dial to set the alarm time. Turn the dial to set the hour
then push to confi rm. Repeat to set the minutes.
Set days
Push dial to set the days that the alarm sounds. Choose
between: Daily (every day), Weekday (Monday to Friday),
Weekend, Saturday or Sunday or Once only (no repeat).
Set alarm mode
Push dial to choose between: Digital radio, FM or Tone (buzzer).
Select station
If you've set alarm mode as Digital radio or FM, choose a digital
station or an FM preset and push to confi rm. Last tuned tunes
to the most recent station.
Alarm volume
If the alarm mode is set to Digital radio or FM, push the dial
to change the alarm volume. Turn the dial left to decrease the
alarm volume or right to increase it then push to confi rm.
symbol on the screen indicates that the
EN
9