Table of Contents
Advertisement
Setting the alarms and timers
Alarm 1 Setup
On
Alarm time
08:00
Alarm repeat
Daily
Alarm source
FM
Alarm FM
Last listened
Alarm volume
Alarm saved
08:30
The alarm is set to
sound at 8:30 am
22:45
08:30
08:30
08:30
12
Setting an alarm
Evoke has two alarms which can switch the radio on and tune to a
digital or FM radio station or sound an alarm tone.
1
1.
Press the
or
2.
Turn and press the Select dial to select 'On'. The alarm is now
active.
3.
To set the time you want the alarm to sound turn the Select dial
to adjust the hours and then push to confirm. Repeat to adjust
the minutes.
4.
Turn and press the Select dial to choose when you want the
alarm to repeat. The available options are 'Daily', 'Weekdays',
'Weekends' or 'Once only'.
5.
Turn and press the Select dial to choose the type of alarm you
want to sound: 'DAB' (digital radio), 'FM' or 'Tone'. If you select
'Tone', there are no further options.
6.
For DAB (digital radio) and FM radio alarms only, push the
Select dial to select 'Select station' and choose the radio
station you want to use for the alarm.
For digital radio alarms
Select 'Last listened', or a preset station. If you select 'Last
listened' the alarm will tune to the last digital station you listen to
before the alarm sounds.
For FM radio alarms
Choose between 'Last listened' or a preset station. If you select
'Last listened' the alarm will tune to the last FM station you listen
to before the alarm sounds.
7.
If you have selected a digital or FM radio alarm you can turn the
Select dial to adjust the volume level for the alarm.
That's it! You can see if the alarm is currently switched on in the
'Full screen time' display (see page 6). Alarms can be set
and adjusted from standby by pressing the
Note: The alarm function does not work when Evoke is being
powered by the ChargePAK F1.
Cancelling a sounding alarm
To cancel a sounding alarm, press either the Menu, Source,
1
2
or Select dial. If you press the Standby button during a
,
sounding alarm, Evoke will enter standby.
Snoozing a sounding alarm
Tap the SnoozeHandle to snooze a sounding alarm for the specified
time (default 10 minutes).
2
button.
1
2
or
button.
Advertisement
Table of Contents
