Safety Instructions - Festool C 12 Li Original Operating Manual

C 12 Li, C 15 Li
GB
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating
Charging times for
Permitted charging temperature range
Temperature monitoring
Battery pack
Voltage
Capacity
Weight
* Speed specifications with fully charged battery pack.
** The maximum speed is reduced in the lower torque stages.
5

Safety instructions

5.1 General safety instructions
WARNING! Read all safety warn-
ings and all instructions. Failure to
follow the warnings and instructions may re-
sult in electric shock, fire and/or serious in-
jury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
– Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the
power tool "live" and could give the opera-
tor an electric shock.
– The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, senso-
ry or mental ability or without suffi-
cient experience and/or knowledge,
unless they are supervised by a per-
son responsible for their safety or
have been instructed on how the
charger or power
used.Children should always be super-
14
LiIon 1.3 Ah/ 2.6 Ah, 80 %
LiIon 1.3 Ah/ 2.6 Ah, 100 %
tool is to be
BPC 12 Li
10.8 V
1.3 Ah
0.3 kg
vised to ensure that they do not play with
the charger or the power tools.
– Switch of the power tool immediately
if the tool is blocked. Always be pre-
pared for high reaction torques that
can cause kickback.
The tool blocks if:
- the power tool is overloaded or
- it becomes jammed in the workpiece be-
ing processed.
– Wait until the power tool stops com-
pletely until placing it down. The tool
can become entangled and lead to a loss of
control of the power tool.
– Avoid unintentional activation. Ensure
that the on/off switch is in switched-
off position before inserting a battery.
Carrying the power tool with your finger at
the on/off switch, or inserting the battery
when the power tool is switched on, can re-
sult in accidents.
– Take care when drilling into walls as there
is a danger of rupturing concealed gas/wa-
ter pipes or cutting through power cables.
– Do not open the battery pack or the charg-
er. Even after disconnection from the
mains, there is still a high capacitor voltage
inside the charger.
– Make sure that metal objects (such as met-
al chips) or fluids do not collect in the bat-
tery pack retaining slots or enter the
TRC 3
220 - 240 V ~
50/60 Hz
7.2 - 18 V=
max. 3 A
approx. 0.06 A
approx. 22/ 45 min
approx. 35/ 70 min
-5 °C to +45 °C
via NTC resistor
BPC 15 Li
14.4 V
2.6 Ah
0.6 kg