Lithium Battery; Cleaning The Device; Transportation And Storage - Sagem EFT930S Installation Manual

5- Keep holding the paper and close the
cover (figure 3).
6- Press simultaneously on both ends of
the top of the paper cover (figure 3).
This snaps in to hold the paper.
The EFT930S is ready for use.
Tip: the paper level can be seen through
the left side hole.
With the installation finished, continue starting up the EFT930S with reference to the application guides.

11.1 LITHIUM BATTERY

Note for maintenance:
Caution, this device contains a lithium battery . There is danger of explosion if its replacement is incorrect.
Only replace with a battery of the same type or equivalent recommended by the manufacturer.
Dispose of used batteries in accordance with the recycling instructions in force.
Only a trained and qualified person may be authorized to work on this component.

11.2 CLEANING THE DEVICE

• Disconnect all the cables from the stub.
• Use soft cloth
VERY LIGHTLY
clean the electrical connectors.

12. TRANSPORTATION AND STORAGE

• Use the original packaging for transportation and storage of the device.
• It is recommended to disconnect the cables from the terminal for transportation.
moistened with soapy water to clean the terminal's covers and base. Do not
39/44
Paper level
fig.3
3000139813-03/721