Table of Contents
Advertisement
Common Configuration
Questions
General Questions
© National Instruments Corporation
This chapter answers common configuration questions you may have when
using a NI PXIe-8130 embedded controller.
What do the LEDs on the NI PXIe-8130 front panel mean?
Refer to the LED status descriptions in the
Chapter 3,
I/O
Information.
After shutting down my NI PXIe-8130 controller, the Ethernet LEDs
continue to blink. Is it safe to remove my controller or disconnect
power?
The NI PXIe-8130 controller Ethernet device remains powered even after
shutdown. It is safe to remove your controller or disconnect power.
How do I check the configuration of the memory, hard drive,
time/date, and so on?
You can view these parameters in the BIOS setup. To enter the BIOS setup,
reboot the NI PXIe-8130 and press <Delete> during the memory tests.
Refer to the
Accessing the BIOS Setup Utility
Installation and
Configuration, for more information.
Can I use the internal Serial ATA drive and an external hard drive at
the same time?
Yes. Refer to the
BIOS Setup Utility
Configuration, for more information.
Front Panel Features
section of Chapter 2,
4-1
4
section of
section of Chapter 2,
Installation and
NI PXIe-8130 User Manual
Advertisement
Table of Contents
