Trigger - National Instruments NI PXIe-8130 User Manual

Trigger

© National Instruments Corporation
The TRIG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-7 shows the TRIG connector location on the NI PXIe-8130.
Table 3-8 lists and describes the trigger connector signals.
Figure 3-7. TRIG Connector Location and Pinout
Pin
1 TRIG
2 (Shield) GND
Table 3-8. TRIG Connector Signals
Signal Name
3-11
Chapter 3 I/O Information
2
1
Signal Description
Trigger
Ground
NI PXIe-8130 User Manual