Correct Handling Of Machine - Dolmar MS-4300.4 U Original Instructions Manual

CORRECT HANDLING OF MACHINE

Attachment of shoulder harness
– Adjust the strap length so that the metal blade will be
kept parallel with the ground.
For MS-4300.4 U, MS-430.4 U
Hold the harness on your back, attach it with the buckle,
and adjust the length of the bands.
NOTE: Be careful not to trap clothing, etc., in the buckle.
For MS-430.4 C
1) Stand as the band plate closer to you. And let your
arms and head pass through the band.
2) The band plate sits on your back and the adjustors and
hook comes on the right side of your body when you
appropriately equip the harness.
Releasing the machine
For MS-4300.4 U, MS-430.4 U
– To release the machine, squeeze the sides of the buckle (1) and take off the
shoulder harness.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
For MS-430.4 C
– To release the machine, release the emergency detachment lever (2) by
pulling strongly with fingers.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
Hanging ring
For MS-4300.4 U
– You can use the ring for hanging something weighing less than 2 kg (4.4 lbs).
NOTICE: Do not hang anything weighing more than 2 kg(4.4 lbs) on the ring.
Anything heavier on the ring can cause it to fail and the item to be
damaged.
CAUTION: Do not hang anything on the ring that can become entangled with
bushes or shrubs. Entanglement can cause loss of balance and
control resulting in personal injury.
(1)
MS-4300.4 U
MS-430.4 U
Hanger
15
Buckle
MS-4300.4 U
MS-430.4 U
Band plate
MS-4300.4 U
MS-430.4 U
(2)
2 kg max
MS-4300.4 U
MS-430.4 C
MS-430.4 C