Electromagnetic Compatibility
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement,
control, and laboratory use:
•
EN 61326 EMC requirements; Industrial Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note
shielded cabling.
CE Compliance
This product meets the essential requirements of applicable
European directives, as amended for CE markings, as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive
(EMC)
Note
this product for any additional regulatory compliance
information. To obtain the DoC for this product, visit
© National Instruments Corp.
For EMC compliance, operate this device with
Refer to the Declaration of Conformity (DoC) for
23
NI 9217 Operating Instructions and Specifications