Table of Contents
Advertisement
Safety
Note
For UL and other safety considerations, refer to the product label, or visit
ni.com/certification
appropriate link in the Certification column.
Electromagnetic Compatibility
Note
For EMC compliance, operate this device with shielded cabling.
CE Compliance
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
certification
in the Certification column.
The NI 8255R may experience temporary data interruption if exposed to
Note
electrostatic discharge (ESD).
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
center. For more information about WEEE recycling centers and National Instruments
WEEE initiatives, visit
NI PCIe-8255R User Manual
The NI 8255R is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control, and
laboratory use:
•
EN 61010-1, IEC 61010-1
•
UL 61010-1, CAN/CSA-C22.2 No. 61010-1
, search by model number or product line, and click the
The NI 8255R is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control, and
laboratory use:
•
EN 61326 EMC requirements; Minimum Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
The NI 8255R meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
•
73/23/EEC; Low-Voltage Directive (safety)
•
89/336/EEC; Electromagnetic Compatibility Directive (EMC)
, search by model number or product line, and click the appropriate link
At the end of their life cycle, all products must be sent to a WEEE recycling
ni.com/environment/weee.htm
14
ni.com/
.
ni.com
Advertisement
Table of Contents
