Table of Contents
Advertisement
Safety
Note
Refer to the product label, or visit
number or product line, and click the appropriate link in the Certification column for UL
and other safety certifications.
Electromagnetic Compatibility
Note
For EMC compliance, operate this device with shielded cabling.
CE Compliance
Refer to the Declaration of Conformity (DoC) for this product for any additional
Note
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification
appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
center. For more information about WEEE recycling centers and National Instruments
WEEE initiatives, visit
© National Instruments Corporation
The NI 781xR is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CAN/CSA-C22.2 No. 61010-1
The NI 781xR is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
•
EN 61326 EMC requirements; Minimum Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
•
73/23/EEC; Low-Voltage Directive (safety)
•
89/336/EEC; Electromagnetic Compatibility Directive (EMC)
, search by model number or product line, and click the
At the end of their life cycle, all products must be sent to a WEEE recycling
ni.com/environment/weee.htm
ni.com/certification
A-5
Appendix A
Specifications
, search by model
.
NI 781xR User Manual
Advertisement
Table of Contents
