Speaker Volume & Volume Control Buttons; Using Your Jabra Bt100 Headset - Jabra BT100 User Manual

Speaker Volume & Volume Control Buttons
To increase the speaker (receive) volume, press and
hold the upper volume control button until the
desired level is reached. To decrease the speaker
(receive) volume, press and hold the lower volume
control button until the desired level is reached.
An audible tone is played when either the minimum
or maximum volume has been achieved.
The headset is equipped with intelligent volume
re-orientation control so that it does not matter
whether you are wearing the headset on the left or
right ear. When you change the earhook from right
to left wearing style - the top volume control button
will always increase the speaker volume and the
bottom volume control button will always decrease
the speaker volume.
14

Using your JABRA BT100 Headset

a) Making a call with the headset
There are different ways to make a call using your JABRA BT100 headset. (In each case
you will need to make sure that you pair / link your headset and phone as described
on page 9.)
If your mobile phone supports voice dialing, you can use this feature with the
headset. Please refer to your phone's user documentation for more information on
voice control.
Making a call from the Mobile Phone
1. Place the headset on your ear in the desired wearing style.
2. Using the phone's keypad, dial the phone number.
3. To send the call, press the phone's SEND / CALL key – the phone initiates the call.
Making a call Using Voice Dialing (Voice dialing on your phone must be turned On
and voice tags stored)
1. Place the headset in the desired wearing style.
2. On the Headset - Press the Multi Function Button. (MFB)
3. A tone prompts you to say the name of the person you wish to call (as entered in
the phone's voicedial phonebook directory).
15