Table of Contents
Advertisement
HTC 1500 ixT
•
•
1.6. Unpacking the machine
Warning!
Read through the safety instructions and the manual carefully
before use.
•
•
1.7. Machine name plate
The serial number is stamped on the top of the grinding head's right
lifting arm.
The machine name plate provides the following information. The
model and serial number must be specified when ordering spare
parts for the machine.
Figure 1-1 Machine name plate
3.0
Charging cable
Hammer EZ system
Check carefully to see if the packaging or machine has
been damaged during delivery. If there are signs of damage,
contact your retailer and report the damage. Report any
external damage to the transport company as well.
Check that the delivery matches your order. If you have any
questions, contact your retailer.
1.
Model
2.
Model number
Introduction
3
Advertisement
Table of Contents
