Introduction; General; Liability; Manual - HTC 1500 IXT User Manual

Table of Contents

Introduction

HTC 1500 ixT

1. Introduction

The HTC 1500 ixT (i = industralised system, x = four grinding

discs/grinding heads, T = two grinding heads) is a grinding

machine with integrated dust separator used for grinding, coarse

grinding, preparing and polishing concrete, natural stone and

terrazzo floors. Simply fit the tool that is applicable to the task. The

dust sucked up is collected in two bags under the dust separator.

Read through this manual carefully so that you know how to use

and maintain the machine before using it. Contact your retailer for

more information. For contact information, see Contact Information

at the start of the manual.

Although every effort has been made to ensure that the information

in this manual is correct and complete, we accept no responsibility

for errors or omissions. HTC reserves the right to change the

descriptions contained in this manual without prior notice.

This manual is protected by copyright law and no part of it may be

copied or used in any way without the written approval of HTC.

In addition to general functions, this manual deals with areas of

application and maintenance of the grinder.

1.3.1. Safety instructions – explanation of symbols

In order to clearly mark particularly important sections, there are

a number of symbols in the manual – see below. In order to avoid

both personal injury and material damage as much as possible, it is

extremely important to read and understand the text next to these

symbols particularly carefully. Practical tips are also marked with a

symbol. These tips are to make it easier to use the machine and to

get maximum benefit from it.

The following symbols are used in the document to highlight for

the reader when to be observant.

3.0

Table of Contents