Transportation; On Delivery; Unpacking The Machine - HTC GL 270 User Manual

Introduction
Note!
This symbol means Note! and indicates that material damage can occur if the
machine or its accessories are used incorrectly. If you see this symbol next to a
section of text, you must be particularly careful when reading through the text
and not carry out any stages of which you are unsure. This is to avoid damage
to the machine or other equipment.
Tip!
This symbol means Tip! and indicates that you can get tips and advice on ways
to make operating your machine or associated equipment easier, and to avoid
wear. When you see this symbol you should read the accompanying text to
facilitate your work and increase the service life of the machine.
1.4

Transportation

The machine is best transported securely fastened to a pallet.
1.5

On delivery

The following items are included in the delivery. Contact you retailer if anything is
missing.
• Grinding machine
• Manual disc
• Hammer EZ system
• Face spanner (not for HTC GL 270 and HTC GL 400)
• Lock spring tool holder
• Allen key
• Gloves
• HTC Cap
1.6

Unpacking the machine

Warning!
Read through the safety instructions and the manual carefully before use.
2
HTC GL
270/400/450/550
1.0