Maintenance and repairs
2.
3.
4.
5.
6.
5.6. Repairs
Any repairs that may be required must be carried out by a HTC
Service Centre, which has trained service personnel and uses
HTC original parts and accessories. Contact your retailer if your
machine requires servicing. For contact information, see Contact
Information at the start of the manual.
5.7. Spare parts
To ensure rapid delivery of spare parts, always specify the model,
the machine's serial number and the spare part number when
ordering. Information on the model and serial number can be found
on the machine's name plate.
Information on spare part numbers can be found in the machine's
spare parts list which is available to read or print out from the
accompanying digital media or HTC's website:
www.htc-floorsystems.com
Only original tools and spare parts from HTC may be used.
Otherwise neither the CE marking nor the warranty will be valid.
40
Remove the grinding cover and check that it is
undamaged.
Scrape and vacuum-clean the parts shielded by the grinding
cover.
Check the fans in the dust separator, clean the filters and
replace if necessary.
Test run and listen for any dissonance from the bearings.
Clean the particle filter for the Mist Cooler system.
HTC 1500 ixT
3.0