National Instruments IMAQTM User Manual page 51

cwimaqMeasurementNormMomentOfInertiaXY
cwimaqMeasurementNormMomentOfInertiaXYY
cwimaqMeasurementNormMomentOfInertiaYY
cwimaqMeasurementNormMomentOfInertiaYYY
cwimaqMeasurementNumberOfHoles
cwimaqMeasurementNumberOfHorizSegments
cwimaqMeasurementNumberOfVertSegments
cwimaqMeasurementOrientation
cwimaqMeasurementParticleAndHolesArea
cwimaqMeasurementPerimeter
cwimaqMeasurementRatioOfEquivalentEllipseAxes
cwimaqMeasurementRatioOfEquivalentRectSides
cwimaqMeasurementSumX
cwimaqMeasurementSumXX
cwimaqMeasurementSumXXX
© National Instruments Corporation
Table 4-1. Measurement Types (Continued)
Measurement
Chapter 4
The normalized moment of inertia in the
X and Y directions.
The normalized moment of inertia in the
X direction once and the Y direction
twice.
The normalized moment of inertia in the
Y direction twice.
The normalized moment of inertia in the
Y direction three times.
Number of holes in the particle.
Number of horizontal segments in the
particle.
Number of vertical segments in the
particle.
The angle of the line that passes through
the particle Center of Mass about which
the particle has the lowest moment of
inertia.
Percentage of the particle Area in
relation to its Particle & Holes' Area.
Sum of the perimeters of each hole in the
particle.
Equivalent Ellipse Major Axis divided
by Equivalent Ellipse Minor Axis.
Equivalent Rect Long Side divided by
Equivalent Rect Short Side.
The sum of all X-coordinates in the
particle.
The sum of all X-coordinates squared in
the particle.
The sum of all X-coordinates cubed in
the particle.
4-9 IMAQ Vision for Visual Basic User Manual
Performing Particle Analysis
Description