Yamaha NUAGE I/O 16D Operation Manual page 20

Description of the Software Programs
NUAGE I/O (16A)
1
2
4
5
6
9
)
NUAGE I/O (8A/8D)
1
2
4
5
6
9
)
7
8
Name
1
Displays the name of the device or DAW software. To
change this name, click "Property" on the Workgroup area
in the Main window.
Version
2
Displays the version. You can confirm the firmware version
in case of devices, or the version of NUAGE Extension in
the case of Nuendo, or the version of NUAGE PT Bridge in
the case of Pro Tools.
20 NUAGE I/O (16D) / NUAGE I/O (16A) / NUAGE I/O (8A8D) Operation Manual
3
3
Update
3
Update the device's firmware. For details, refer to the
NUAGE Firmware Update Guide.
MAC Address
4
Displays the MAC Address.
Word Clock Source
5
Selects the word clock source.
Input and output
6
Displays the input and output.
Dual Wire
7
Turns the Dual Wire function on and off. You can turn on
and off the Dual Wire by eight channels.
This function is available when the sample rate is set to
88.2, 96, 176.4, and 192 kHz, and also the SRC is turned
off.
SRC
8
Turns the sample rate converter on and off. This function
is only available when the Dual Wire is turned off.
Level
9
Selects the input level.
Trim
)
Adjusts the trim.