Yamaha NUAGE I/O 16D Operation Manual page 18

Description of the Software Programs
LPF1
4
Selects the type of low pass filter for the LFE channel.
Option Description
THRU The filter is not applied.
80-24 A Butterworth filter with a cutoff frequency of
80 Hz and -24 dB of attenuation.
80-24L A Linkwitz filter with a cutoff frequency of
80 Hz and -24 dB of attenuation.
120-42 A Butterworth filter with a cutoff frequency of
120 Hz and -42 dB of attenuation.
LPF2
5
Selects the type of low pass filter for the LFE channel
which is sent the signal from each channel.
Option Description
THRU The filter is not applied.
80-24 A Butterworth filter with a cutoff frequency of
80 Hz and -24 dB of attenuation.
80-24L A Linkwitz filter with a cutoff frequency of
80 Hz and -24 dB of attenuation.
MUTE The filter is muted.
ATT1/2
6
Sets the attenuator for each channel. The setting range is
from 0 dB to -12 dB.
AMP
7
Sets the amplifier for the LFE channel. The setting range is
from 0 dB to +12 dB.
Block diagram
8
Indicates the position of each parameter in Bass
Management.
18 NUAGE I/O (16D) / NUAGE I/O (16A) / NUAGE I/O (8A8D) Operation Manual
ATT & Delay Window
1
2
3 4
Presets
1
For selecting, storing, and deleting the preset.
Monitor
2
Selects the monitor for configuring the settings.
Mute on/off
3
Turns muting of the channel on and off.
Channel
4
Displays the channel.
Port
5
Displays the channel port.
ATT(dB)
6
Sets the attenuator/gain for speaker 1 and 2. The setting
range is from 0 dB to -12 dB, and the smallest unit is
0.1 dB.
DELAY(ms)
7
Sets the delay for the channel. The setting range is from 0
to 30 milliseconds, and the smallest unit is 0.02
milliseconds.
5 6 7