Advertisement
4
GENERAL INSTRUCTIONS
THE INSTALLATION MUST CONFORM WITH LOCAL
CODES OR, IN THE ABSENCE OF LOCAL CODES WITH
THE NATIONAL FUEL GAS CODE, ANSI Z223.1 / NFPA
54 AND TO THE NATIONAL ELECTRICAL CODE, ANSI /
NFPA 70.
Use only accessories designed for and listed
with your specifi c fi rebox.
Not designed for use with a glass door.
Screen must be closed when appliance is in
operation.
HOOD INSTALLATION
Warning: Do not operate without hood in place.
The fi rebox hood must not be modifi ed or replaced with a
hood that may be provided with the unvented decorative
room heater.
1
FIGURE 1
Note: Remove the hood from the back side of the
carton by cutting the cable ties holding it in place.
1. Slide the edge of the hood into place on the top inside
surface of the ventless fi rebox enclosure to align with the
three pre-drilled holes.
2. Screw the hood securely into place with the three screws
provided. (FIGURE 1)
W415-0527 / 09.29.05
2
SPECIFICATIONS
ZCVF36
1 3/4"
21 1/8"
32 1/2"
ZCVF42
1 3/4"
21 1/8"
35 1/2"
42.000"
31 7/8"
46 5/8"
36 3/8"
Advertisement
