Glowing Embers; Charcoal Embers; Logo Placement - Napoleon GDS28P Installation And Operating Instructions Manual

5.3

GLOWING EMBERS

DO NOT BLOCK THE BURNER PORTS. BLOCKED PORTS CAN CAUSE AN INCORRECT FLAME
Tear the glowing embers into pieces and place onto the screen beneath the front log. Care should be taken to
shred the embers into thin, small irregular pieces as only the exposed edges of the fi bre hairs will glow when
exposed to direct fl ame.
5.4

CHARCOAL EMBERS

Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
5.5

LOGO PLACEMENT

Remove the backing of the logo supplied and centre over the logo installation holes, as indicated.
!
PATTERN, CARBON DEPOSITS AND DELAYED IGNITION.
WARNING
31
31.1
32.1
W415-0153 / B / 06.10.10