Sony MHC-GTR8 Operating Instructions Manual page 37

7
To program additional folders,
tracks or files.
To program
Other tracks or files
on the same disc/
USB device
Other tracks or
files on other discs/
USB device
Other files on the
same folder
Other files on
other folder
8
Press N.
Program Play starts.
To program a track or file by using
OPERATION DIAL
1
Perform step 1 to 3 of "Creating
your own program".
2
(For audio files only)
Turn OPERATION DIAL to select
the folder you want, then press
ENTER.
3
Turn OPERATION DIAL to select
the track or file you want.
4
Press ENTER.
The programmed step number appears
in the display.
Repeat steps
4 to 6
3 to 6
5 and 6
4 to 6
Other operations
To Do this
Cancel Program When playback is
Play stopped, press PLAY
MODE on the remote
repeatedly until "PGM"
disappear from the
display.
Delete the last step Press CLEAR on the
from the program remote when playback is
list stopped.
Notes
• The program list is cleared when you
disconnect the AC power cord.
(For CD function only)
• The program list is cleared when you eject the
disc.
(For USB function only)
• The program list is cleared when you:
– perform the erase operation.
– remove the USB device from the
port or B port.
– switch the USB memory select.
Tips
• The program you made remains in the
system's memory even after it has been
played back. Press N to play back the same
program again.
• If "--.--" appears instead of the total playing
time during programming, this means:
– the total playing time has exceeded 100
minutes.
– you have programmed an audio file.
– the current disc is DATA-CD or USB.
A
37 GB