Transferring Onto An Usb Device - Sony MHC-GTR8 Operating Instructions Manual

To tune in a station with a weak
signal
Use buttons on the remote for the
operation.
1
Press TUNING MODE repeatedly
until "AUTO" and "PRESET"
disappear from the display.
2
Press +/– repeatedly to tune in the
station you want.
You can also use TUNING +/– on the
unit.
To change the AM tuning interval
The factory setting for AM tuning interval
is 9 kHz (or 10 kHz for some areas).
Use the buttons on the unit for the
operation.
1
Press TUNER/BAND repeatedly to
select AM band.
Press TUNER AM to select AM band
(For Latin American and Mexican
models only).
2
Press "/1 to turn off the system.
3
When demonstration appears, hold
down ENTER and then press "/1.
The system turn on automatically.
"AM 9K STEP" or "AM 10K STEP"
appears in the display.
When you change the interval, all the AM
preset stations are erased.
Tip
To improve broadcast reception, adjust the
supplied antennas, or connect an external
antenna.
To reduce static noise on a weak FM
stereo station
Press FM MODE on the remote
repeatedly until "MONO" lights up in the
display.
There will be no stereo effect, but the
reception will improve.
22 GB
Transferring onto an
USB device
You can transfer music from a sound
source to an optional USB device by
connecting it to the
unit.
The audio format of files transferred by
this system is MP3.
For transferring from USB A to USB B
you can also transfer WMA and AAC file.
When transferring from audio files, the
file size is the same as the original file.
See "Compatible USB devices with this
system" (page 58) for a list of USB
devices that can be connected to this
system.
CD-USB Synchronized Transfer
You can easily transfer an entire disc onto
an USB device.
1
Connect a transferable USB
device to the
shown below.
When the USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
Refer to the operating instructions
supplied with the USB device to be
connected for details on the operation
method.
B port on the
B port as
USB device