NAPCO Gemini GEM-K2AS Operating Manual page 7

A R M I N G AW A Y : S E T T I N G T H E AL A R M W H E N L E AV I N G
CAN'T/
ARM
A C O N
CAN'T/
ARMZNF
A C O N
CAN'T/
ARMSIL
A C O N
CAN'T/
ARMSND
A C O N
T R O U B L E
CAN'T/
ARMRST
A C O N
Priority Arming. If you attempt to arm with a faulted Priority Zone, a 3-second tone
will sound at the keypad, and "CAN'T ARM" will display in the window, indicating that the
trouble(s) must be corrected before the panel can be armed. A zone selected as Priority
Zone with Bypass (check your Alarm Plan) may be bypassed if in trouble. If the problem
cannot be corrected immediately, press
sound at the panel to indicate arming with a Priority Zone in trouble. Be sure to have the
trouble repaired as soon as possible.
Silence Alarm. If you enter your code while the alarm is sounding the message
"CAN'T/ARMSIL" will be displayed. The system will silence the alarm and will be ready
to be armed again.
Alarm Sounding. If you are attempting to arm with Easy Arm (Optional) and the
alarm is sounding, "CAN'T ARMSND" will be displayed. The alarm will not silence. Only
a valid User Code will silence the alarm.
System Trouble. If you enter your User Code with a system trouble present, the
message "CAN'T ARMRST" will be displayed. To arm, press
bles should disappear.
, then arm the panel. A 3 second beep will
C
C
and the system trou-
7