TANDBERG GW User Manual page 47

Dial In Number
All incoming calls received on this number will use the IVR/TCS-4 service.
Dial In Max. Bandwidth
The call rate (bandwidth) for incoming calls will automatically be determined by the endpoint. However, you can
use this setting to restrict the call rate for incoming DID/TCS-4 calls.
Calls above the Dial In Max. Bandwidth will be downspeeded
to the call rate specified in Dial In Max. Bandwidth.
Calls below the Dial In Max. Bandwidth will be connected at the requested call rate.
Hotline
ISDN Number
All incoming calls received on this number will be forwarded to the IP endpoint specified in 'H.323 E.164 Alias'
field.
H.323 E.164 Alias
All incoming calls received to the Hotline ISDN number will be forwarded to this H.323 Alias.
Max. Bandwidth
The call rate for incoming calls will automatically be determined by the endpoint. However, you can use this
setting to restrict the call rate for incoming Hotline calls.
Calls above the Max. Bandwidth will be downspeeded to the
call rate specified in Max. Bandwidth.
Calls below the Max. Bandwidth will be connected at the requested call rate.
TANDBERG Gateway
NOTE
NOTE
47
Configure the Gateway
D
REQUIRE SUPPORT OF OWNSPEEDING ON THE ENDPOINT
D
REQUIRE SUPPORT OF OWNSPEEDING ON THE ENDPOINT
.
.