TANDBERG GW User Manual page 18

Using the Gateway
Usage
The usage bar shows the current status of all the available resources (CPU, ISDN channels and number of calls)
When the Resource Usage reaches the "Busy on Load"-limit, the gateway will try to route outgoing IP calls to
other gateways. This is done to maintain availability for incoming ISDN calls when using multiple gateways.
Resource Usage 90%. Click on Usage to see resource usage in detail.
H.323 Busy on Load> 70%. Click on on Load to adjust the value.
ISDN Numbers
Shows the available ISDN dial-in numbers for IVR,
TCS-4, DID and Hotline.
H.323 Numbers
Shows the available H.323 Services (dial-out prefixes)
for accessing/dialing the ISDN network.
TANDBERG Gateway
F
OR MORE INFO ABOUT
TIP
'D
IAL FROM
F
OR MORE INFO ABOUT
TIP
IP'
FROM
18
IVR, H
OTLINE OR
ISDN' 'U
SECTION IN SING THE
H.323 ,
SERVICES
'U G
SECTION IN SING THE ATEWAY
DID,
PLEASE READ THE
G '.
ATEWAY
'D
PLEASE READ THE IAL
'.