TANDBERG GW User Manual page 16

Using the Gateway
Source
Shows the Status of the incoming call to the gateway, the Number and which Network the incoming call is using.
Idle No active call, call just been disconnected.
Alerting Call is being connected.
Connected Call is connected.
Clear out Call is being disconnected.
Number ISDN or IP number.
ISDN Call connected is using the H.320 protocol over ISDN.
IP/H.323 Call connected is using the H.323 protocol over IP.
Destination
Shows the Status of the outgoing call from the gateway, the Number and which Network the call is using.
Idle No active call, call just been disconnected.
Establ out Gateway is calling out to destination.
Alerting Call is being connected.
Connected Call is connected.
Clear out Call is being disconnected.
Number ISDN or IP number.
ISDN Call connected is using the H.320 protocol over ISDN.
IP/H.323 Call connected is using the H.323 protocol over IP.
Duration
Shows the length of the current call.
Encryption (Secure conference
The gateway supports Secure Conference DES and AES.
The single padlock symbol indicates that DES (56 bit) encryption is used.
The double padlock symbol indicates that AES (128 bit) encryption is used.
Indicates that the call is not encrypted.
TANDBERG Gateway
)
TF
NOTE
16
E
NABLING ENCRYPTION WILL REDUCE THE CAPACITY OF THE
.
GATEWAY