Table of Contents
Advertisement
1. Follow the instructions in
Before You
2. Connect the camera cable to the connector on the camera module.
3. Use the alignment posts on the display cover to place the camera module in position and snap the camera module into place.
4. Replace the display bezel. See
5. Replace the display assembly. See
6. Replace the hinge cover. See
7. Replace the USB board. See "Replacing the USB Board" on page 48.
8. Replace the optical drive. See
9. Follow the instructions from
10. Replace the battery. See
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Display
Bezel.
Replacing the Display
Assembly.
Replacing the Hinge
Cover.
Replacing the Optical
Drive.
step 3
to
step 7
in
Replacing the Palm-Rest
Battery.
Assembly.
Advertisement
Table of Contents
