Intended Use - Bosch GBH 2-24 DS Operating Instructions Manual

Tool Specifications
Rotary Hammer
Part number
Rated power
Output power
Speed control
Right/Left rotation
Rated speed
- Right rotation
- Left rotation
Impact rate
Impact energy per stroke
Tool holder
Spindle neck diameter Ø
Chisel positions
Drilling output:
- Masonry (core bit) max.
- Stone, Concrete max.
- Wood max.
- Steel max.
Weight
(without optional extras) approx.
Protection class
Machine Elements
1 Dust protection cap
2 Locking sleeve
3 Locking button for On/Off switch
4 On/Off switch
5 Rotational direction switch (GBH 2-24 DSR)
6 Mode selector switch
7 Release button
8 Auxiliary handle
9 Depth stop
Not all of the accessories illustrated or described are
included as standard delivery.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 88 dB (A); sound
power level: 101 dB (A).
Wear hearing protection!
The typical weighted acceleration is 11 m/s
9 • 1 619 929 393 • TMS • 11.10.01
GBH 2-24 DS
0 611 228 0..
[W] 620
[W] 360
–
–
[rpm] 870
[rpm] –
[bpm] 4850
[J] 2.2
SDS-plus
[mm] 43
36
[mm] 65
[mm] 24
[mm] 30
[mm] 13
[kg] 2.4
/ II

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and
right/left rotation are also suitable for screwing
and thread cutting.
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
2
.
English - 1
GBH 2-24 DSE GBH 2-24 DSR
0 611 228 6.. 0 611 228 7..
620 620
360 360
• •
– •
0 – 870 0 – 870
– 0 – 500
0 – 4850 0 – 4850
2.2 2.2
SDS-plus SDS-plus
43 43
36 36
65 65
24 24
30 30
13 13
2.4 2.4
/ II
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
If the mains cable is damaged or
cut through while working, do not
touch the cable but immediately
pull the mains plug. Never use the
machine with a damaged cable.
/ II