Ryobi GD200 Operator's Manual page 40

SETTING THE DOOR TRAVEL LIMITS
See Figures 69 - 76.
DANGER:
Ensure that the safety sensors are installed and working
properly. Without the proper safety devices in place, a
closing garage door could kill or seriously injure someone
in its path.
The console on your garage door opener makes it easy to
set the open and close positions of your door. The opener
will automically sense the weight of your door and provide
the force required to open and close it.
When a garage door is fully closed, there shouldn't be
any space between the door and the garage floor. When a
door is fully open, it should provide enough clearance for
vehicles to travel safely underneath it. Use caution when
setting the open position for single-panel garage doors. If
a single-panel door is opened so far that it begins to slant
backwards, excessive bouncing and jerking may occur as
the door moves, see figure 73.
Console
Door
Program
Test
Reset
Wi-Fi
Console
Door
OPERATION
Down
Set
Up
Circuit
Breaker
Fig. 69
40 - English
Fully Closed
Position
Fig. 70
Fully Open
Position
Fig. 71
Fully Open
Position
Fig. 72