Product Setup; Hardware Installation And Connection; Using The Setup Wizard - D-Link POWERLINE DHP-W313AV Quick Installation Manual

Av 500 wireless ac600 starter kit

Hide thumbs Also See for POWERLINE DHP-W313AV:

Table of Contents

Available languages

PrOdUCT SETUP

ROOM A

Internet

Router

ROOM B

DHP-W312AV

Note: Network connectivity is confirmed when the Powerline LEDs indicators on both Powerline

devices are steadily lit. This will indicate that your network is now secure.

Step 1:

To access the configuration utility, open a web browser such as Internet Explorer and either enter the

address written on the Wi-Fi Configuration Card or one of the following in the address field:

http://dlinkapWXYZ.local./ (WXYZ are the last 4 characters of the DHP-W313AV's MAC address).

Step 2:

By default, Admin will be the User Name. Leave the password blank.

DHP-W313AV

Step 1:

DHP-308AV

Ensure that the DHP-308AV is connected to your router, a

nearby power outlet and is already set up.

Step 2:

Plug the DHP-W312AV into a wall outlet where you want

to extend your network and connect it to a computer via

Ethernet cable (for the setup wizard).

Step 3:

Press the Simple Connect button on the DHP-308AV

device for 3 seconds. Then, within two minutes, press the

WPS (Simple Connect) button on the DHP-W312AV for

3 seconds. The Powerline devices will then reboot and

connect.

Table of Contents