1 2
Press (
to convert Chinese characters, and then
press " 虎 ".
3
Press (
" 虎 " will be inputted.
Entering Text from the Keyboard
(
)
/
[ 新增標籤 ]
Adding a New Line
Move the cursor to the end of the current line and press (
Line 1
NOTE
• There is a maximum number of lines of text that can be entered for
each tape width. A maximum of 7 lines for 24 mm tape, 5 lines for
18 mm tape, 3 lines for 12 mm tape, 2 lines for 9 mm and 6 mm tape,
and 1 line for 3.5 mm tape.
• When [ 輸入模式 ] is set to [ 標籤外貌 ], if you press (
a new line and there is already a maximum number of lines of text that
can be entered for the tape you are using, [ 超過最大允許行數!] will
display. When [ 輸入模式 ] is set to [ 列印預覽 ], if you press
(
) and seven lines already exist, [ 超過最大允許行數!] will
display. Press (
Adding a New Block
To create a new block of text/lines to the right of your current text, press
(
) and (
) or
、 、 or
) .
(
Line 2
) or any other key to clear the error message.
). The cursor moves to the start of the new block.
key
) or (
)
Label image
EDITING A LABEL
Enter the character.
).
) to add
Entering and Editing Text
17