Tape Cutting Options - Brother p-touch pt-d600 User Manual

LABEL PRINTING
Setting
Automatically cuts the tape after each
label is printed, leaving a margin of
24.5 mm on each end.
大
Automatically cuts a piece of blank tape
before printing the first label and then
cuts the tape after each label is printed,
leaving a 2 mm margin at both ends of
小
each label.
• Automatically cuts a piece of blank
省帶
• Once the last label is printed, the tape
• Select this setting when printing
• Once the label is printed, the tape is
不裁切
46
Setting Tape Cutting Options

Tape Cutting Options

Description
tape before printing the first label and
then cuts the tape after each label is
printed, leaving a 2 mm margin at both
ends of each label.
is not fed and cut. Press (
and ( ) to feed and cut the tape.
multiple copies of a label and you do
not want the labels cut after each label
is printed, or when using Fabric Tapes
or other special tapes that cannot be
cut by the tape cutter of the P-touch.
not fed and cut.

Press ( ) and (
and cut the tape.

When using the special tapes that
cannot be cut by the tape cutter of
the P-touch, remove the tape
cassette from the P-touch and use
scissors to cut the tape.
ABC
24.5 mm
ABC
2 mm
24.5 mm
2 mm
24.5 mm
)
ABC AB
24.5 mm
) to feed
Example
ABC
24.5 mm
ABC
2 mm
ABC ABC
2 mm
4 mm