Brother p-touch pt-d600 User Manual page 18

EDITING A LABEL
Use [ 倉頡 ] to enter texts.
Input radicals, and convert Chinese characters word by word.
• You can input up to 5 Chinese character radicals at one time. If you
want to enter a group of characters, please press (
convert Chinese characters, and then enter the next character.
Example " 仲 "
1
Under [ 倉頡 ] input method, type (
( ).
To clear inputted texts word by word,
press (
To clean all inputted texts, press (
1 2
Press (
3
Press (
characters, and then press " 仲 ".
1 4
Press
" 仲 " will be inputted.
Use [ 簡易倉頡 ] input Method to enter texts
This method is to input the first and last radicals of 倉頡 , and then
convert optional Chinese characters. Follow the steps below to
convert Chinese characters word by word.
Example " 虎 "
1
Under [ 簡易倉頡 ] input method, type
( ) (
" 卜弓 " will be displayed in reverse, and at
the same time the optional characters will
appear on the screen. If you convert
a Chinese character, it will be confirmed when you input next
character.
16
Entering and Editing Text
).
) .
) or
、
.
).
)
).
、 or key to convert Chinese
) to