Entering Text from the Keyboard
• The keyboard of your P-touch labeling system can be used in the same way as a standard
computer keyboard.
Adding a New Line
• To end the current line of text and start a new line, press the Enter key. A return mark
appears at the end of the line and the cursor moves to the start of the new line.
• Maximum number of lines
- 0.94" (24 mm) tape: 7 lines
- 0.70" (18 mm) tape: 5 lines
- 0.47" (12 mm) tape: 3 lines
- 0.35" (9 mm) and 0.23" (6 mm) tape: 2 lines
- 0.13" (3.5 mm) tape: 1 line
Adding a New Block
• When GENERAL is selected, you can create up to 99 new blocks. To create a new block
of text/lines to the right of your current text, press the Shift key and then press the Enter
key. The cursor moves to the start of the new block. In other labeling application types, you
can set the number of blocks when pressing a label application key. Some labeling
application types are not required.
Moving the Cursor
• Press the
,
,
• To move the cursor to the beginning or end of the current line, press the Shift key and then
press the
or
key.
• To move the cursor to the beginning of the previous or next block, press the Shift key and
then press the
or
Inserting Text
• To insert additional text into an existing line of text, move the cursor to the character at the
right of the position where you want to start inserting text, and then enter the additional text.
The new text is inserted to the left of the cursor.
Deleting Text
Deleting one character at a time
• To delete a character from an existing line of text, move the cursor to the character at the
right of the position you want to start deleting text, and then press the BS (backspace) key.
The character to the left of the cursor is deleted each time the BS (backspace) key is
pressed.
If you hold down the BS (backspace) key, the characters left of the cursor are
continuously deleted.
Entering and Editing Text
or
key to move the cursor one space or line.
key.
Entering and Editing Text
1
2
3
4
5
6
7
8
9
7