Fabric Softener - Fisher & Paykel AquaSmart WL26CW1 Product Information

Table of Contents

Advertisement

Fabric Softener

Type
Yes, you can use liquid fabric softener in AquaSmart™. However Fisher & Paykel do not
recommend the use of in-wash liquid fabric softeners as they can produce a waxy build up
known as scrud inside the machine, damaging your appliance. Instead we advise using dryer
softener sheets, which are added to your clothes in the dryer. However, for those people who
prefer using liquid fabric softeners, AquaSmart™ does have a fabric softener dispenser.
Dosage
Use the manufacturer's instructions on the fabric softener packet to carefully measure the right
amount to use. Thinner varieties are recommended as they dispense more cleanly than thick
liquids. Dilute thicker varieties with water.
Where?
A fabric softener dispenser is located on the front left of the machine,
next to the detergent dispenser. The dispenser is designed to keep
fabric softener separate from detergent, preventing the formation of
scrud. It is important that the Fabric Softener dispenser is not
overfilled, as this will contribute to the formation of scrud. The
dispensing funnel has a "Max Fill" line that should not be exceeded.
Above. Adding softener to the
fabric softener dispenser
How it works
The fabric softener works by filling the well with water, and siphoning the softener out down
into the sump. This water/fabric softener mix is then further diluted and spread throughout the
load.
Fabric softener requires a deep rinse to be evenly distributed through the load, so must be used
with either a Fabric Softener or Spray and Deep Rinse. If High Efficiency mode is ON, then
Fabric Softener must be selected in the Wash Options menu. This changes the rinse to a
spray and deep rinse. If a Conventional cycle is done, then fabric softener will automatically be
dispensed in the deep rinse. All deep rinses will flush the fabric softener dispenser during fill in
case the user forgets to select the fabric softener option.
The fabric softener dispenser needs to be washed frequently to prevent residue from building
up. The dispenser is designed so the top part (funnel) can easily be removed, and may be
washed in a dishwasher or simply held under the tap and wiped clean. The siphon tube remains
in place, and may have become blocked. If so, clean with a damp cotton bud.
Above. Removing the fabric softener funnel
When the funnel is removed a yellow bubble is visible. This is used for levelling the machine
during installation. The funnel must be replaced before washing can begin to avoid leaks.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents