Table of Contents
Advertisement
VSS7915/00T & VS79155T | Installation Instructions
Sunken mount
Four short screws
•
Using the inside of the frame plate as a template, mark the
position of the hole required for the unit.
•
Cut out the center hole.
•
Use the four tamper-resistant screws (4 x 50mm) and clips to attach
the frame plate to the surface (use the outer holes).
•
If you want to mount the mounting box directly onto a wall
instead, break out the four tabs in the mounting box and drill
holes for the four 3.5 x 25mm screws (use plugs if necessary).
Bosch Security Systems | 2003-11
Four tamper-resistant
screws 4 x 50mm with clips
Tamper-resistant screw 3 x 10mm
Mounting box
EN | 5
Frame plate
Advertisement
Table of Contents
