Table of Contents
Advertisement
VSS7915/00T & VS79155T | Installation Instructions
Adjustments and switches
The printed circuit board has an loudspeaker level potentiometer,
two DIP switches and an anti-tamper alarm switch.
Loudspeaker
level
adjustment
DIP 1
default Off
Anti-tamper switch override
When the unit is removed from the mounting box the anti-tamper
switch triggers an alarm on the monitor. To suppress this alarm while
servicing the system, set the tamper override DIP switch to the On
position. Don't forget to reactivate the anti-tamper switch by
switching the override to the Off position.
Bosch Security Systems | 2003-11
EN | 9
DIP 2
Anti-tamper
override switch
(default Off)
Anti-tamper
switch
Advertisement
Table of Contents
