Appendix A - Leg Support Plate Installation Instructions (Optional On Model Cgc) - Curtis CGC Service Manual

Appendix A - Leg Support Plate Installation Instructions (Optional on Model CGC)

For ease of installation, the brewer may be laid on its side to allow access to the bottom. Lay the unit on a
soft padded surface to avoid scratches.
1. Remove the four legs from the bottom of the brewer by unscrewing them. The front legs are different from
the rear legs. Note the location and difference between the two types during removal.
2. Place the leg support plate on the bottom of the unit. Line up the leg holes in the plate with the leg holes on
the bottom of the unit.
3. Reinstall the legs in the same positions they were removed from in step 1.
LEG SUPPORT PLATE
two persons are required to avoid
personal injury.
REAR LEG
FRONT LEG
EXCESSIVE WEIGHT
WARNING: When lifting
the brewer, at least
CAUTION: Drain the
water tank before laying
the brewer on its side.
23