HP R100-Series Configuration And Administration Manual page 65

3. Set a static IP address for the router.
Select LAN > Settings. Set the IP address to 192.168.5.20.
Click Save, and then restart the web browser session using the IP address 192.168.5.20.
4. Select a common operating channel.
Select Wireless > Basic. Select the same radio band and channel as set for R1 10 #1.
5. Set a common SSID for each WDS link.
To configure SSIDs for R1 10 #2, select Wireless > Basic, enable the first two VAP
interfaces, and set the SSIDs as follows:
•
Set VAP 1 to HP22 (for WDS link with R1 10 #3).
•
Set VAP 2 to HP12 (for WDS link with R1 10 #1).
6. Enable WDS Mode for the VAP interfaces.
Select Wireless > WDS. For R1 10 #2 VAP interfaces, set the WDS Mode as follows:
•
Set VAP 1 to WDS-AP.
•
Set VAP 2 to WDS-STA.
WDS settings 65