Table of Contents
Advertisement
This page includes the following information:
Connection Type
Select PPPoE as the router's method of connecting to the ISP.
Username
Enter your ISP-assigned user name. Do not use these characters: ` " & ' # \
Password
Enter your password (usually assigned by your ISP). Do not use these characters: ` " & ' # \
Confirm Password
Enter the password again to confirm it.
Service Name
The service name is typically optional, but may be required by some service providers. The
service name defines the attributes used to set up a dynamic PPPoE subscriber interface. HP
recommends that you do not enter a service name unless your service provider instructs you to
do so.
Idle Time
Select the number of minutes to elapse without activity before the PPPoE connection is
disconnected. Or, you can leave the default setting of Always On so that the connection is
kept open regardless of any activity. (Options: 1, 2, 5, 10, 30, 120 minutes and Always On)
32
WAN configuration
Advertisement
Table of Contents
