Audio Connection To Optional Equipment - NAD T534 Owner's Manual

Installation and Setup
CONNECTIONS

AUDIO CONNECTION TO OPTIONAL EQUIPMENT

Connect the DVD player to your optional equipment for audio output.
Rear of DVD player
O X
OPTICAL COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
R
12
A
R L
AUDIO INPUT
F
C
Front R Front L Center
Rear R Rear L Subwoofer
ANALOG 5.1CH AUDIO INPUT
Amplifier equipped with 2-channel analog stereo or Dolby Pro
Logic ll / Pro Logic
Connect the left and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier, receiver, or stereo system,
using the audio cables (A).
Amplifier equipped with 2-channel digital stereo (PCM) or
audio / video receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
1 Connect one of the DVD Player's DIGITAL AUDIO OUT jacks
(OPTICAL O or COAXIAL X) to the corresponding in jack on your
amplifier.
2 Use an optional digital (optical O or coaxial X) audio cable.
DIGITAL MULTI-CHANNEL SOUND
A digital multi-channel connection provides the best sound quality. For
this you need a multi-channel audio / video receiver that supports one
or more of the audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver manual and the
logos on the front of the receiver.
NOTES
• If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a strong, distorted
sound or no sound at all.
• Six Channel Digital Surround Sound via a digital connection can only
be obtained if your receiver is equipped with a Digital Multi-channel
decoder.
• To see the audio format of the current DVD in the on-screen display,
press AUDIO.
Analog connection to a multi-channel A/V receiver with
6 Channel connectors (Dolby Digital)
1 This DVD Player contains a multi-channel decoder.
2 This enables playback of DVDs recorded in Multi-channel Surround
without the need for an optional decoder.
Make the appropriate Sound settings for Analog Output and Speaker
Settings in the setup menu. See page 29.