Audio Connection To Optional Equipment; Before Operation - NAD T514 Owner's Manual

AUDIO CONNECTION TO OPTIONAL EQUIPMENT

Connect the DVD player to your optional equipment for audio output.
Rear of DVD player
O X
OPTICAL COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
Amplifier equipped with 2-channel analogue stereo or Dolby Pro
Logic ll / Pro Logic
Connect the left and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier, receiver, or stereo system,
using the audio cables (A).
Amplifier equipped with 2-channel digital stereo (PCM) or audio
/ video receiver equipped with a multi-channel decoder (Dolby
Digital™, MPEG 2, or DTS)
1 Connect one of the DVD Player's DIGITAL AUDIO OUT jacks
2 Use an optional digital (optical O or coaxial X) audio cable.
A
DIGITAL MULTI-CHANNEL SOUND
A digital multi-channel connection provides the best sound quality. For
this you need a multi-channel audio / video receiver that supports one
or more of the audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver manual and the
L
R
logos on the front of the receiver.
AUDIO INPUT
NOTES
• If the audio format of the digital output does not match the
• Six Channel Digital Surround Sound via a digital connection can only
• To see the audio format of the current DVD in the on-screen display,
Installation and Setup
(OPTICAL O or COAXIAL X) to the corresponding in jack on your
amplifier.
capabilities of your receiver, the receiver produces a strong, distorted
sound or no sound at all.
be obtained if your receiver is equipped with a Digital Multi-channel
decoder.
press AUDIO.
CONNECTIONS
11